Payment & Shipping Terms:
|LED Source:||Super Bright SMD 5630||Input Voltage:||85-265VAC|
600x600 Commercial Dimmable LED Flat Panel Ceiling Lights Cool White 85 - 265 Vac
I. Main Technical Parameter:
2. Rated Output Power:40W
3. Rated Input Voltage:85-265 Vac；
4. Rated Input Frequency Range:47～63Hz；
5. Power Factor:≥0.93；
6. Ra>75 Material: Pure Aluminum Lamp Size: L1197*W297*T13MM
7. Rated Initial Luminous Flux: 3400 lm；
8. Rated Color Temperature:3000-6000K
7. LED chip: 96pcs SMD5630
8. Gross weight: 3.5 kg per pcs
9. Packing size: L1370*W200*H380MM (5pcs Inside)
1. super slim designing
2. convenient for installing , can be both installed by hanging and surface mounted
3. high light output effiency
4. low maitance .
5. fast delivery , 2 weeks after order confirmation
Package Size :
Producing steps and aging pictures
1.Please make sure the working voltage is correct. Incorrect voltage may lead to damage
of the panel light.
2. Do not use this panel light in the outdoor environment, emergency exit facilities, or
emergency lighting facilities.
3. To avoid electric shock, after fitting the panel light and switch on the power, please do not
touch the metal area of the screw base.
4. Before open the package, please check for any damage on the package caused during
transportation. Please inform the supplier for replacement if any damage on the package is
5. For product safety, please follow the instruction manual.
6. Before installation, please make sure the installation area can endure 10 times of the
panel light weight. panel light should be installed in the flat surface, an environment without
vibration, swing, and threat from fire.
7. During the panel light operation, the case may reach 55°C. Panel light should keep away
from temperature sensitive equipment. After switch off the power, please wait for 30 minutes,
before uninstall the light bulb.
8. This is a semiconductor lighting fixture, and it is very sensitive to the ambient temperature.
If the ambient temperature is above 55°C, the life span of the panel light will be shortened.
Hence please keep the panel light away from the heat source. To maximize the life span of the
panel light, please maintain the working temperature at between -20°C to 25°C, and make sure
the working environment has good ventilation.
9. Please do not switch the power on and off continuously within a short period. This will lead to
the damage of the lamp.
10. Under emergency situation, please do the following:
(1) Please check the input voltage.
(2) Please check the switch is functioning normally
(3) If the lamp still cannot light up, please inform the professionals for further examination.
More about us , please check on : www.ledbulkheadlight.com